TILE INSTALLATION MATERIALS

  • SGM Floor Mud (833) Quick View
    • SGM Floor Mud (833) Quick View
    • ,

    • SGM Floor Mud (833)

    • LIMITATIONS SGM Floor Mud Surface Preparation (833) is not an adhesive mortar; use on substrate only. For additional strength and adhesion, use Southcrete™ 30 High-Strength Admix in lieu of water. Tile can be set with SGM Floor Mud Surface Preparation (833) while still plastic using neat Portland Cement Bond Coat conforming to ANSI-108.1 guidelines. CHARACTERISTICS Saves Time and Labor Water Resistant Quality Controlled Mix Vermin Proof PREPARATION SGM Floor…
    • Read more
  • SGM Glass Block Mortar Quick View
    • SGM Glass Block Mortar Quick View
    • ,

    • SGM Glass Block Mortar

    • INSTALLATION SURFACE PREPARATION Insure that all framing, pocket recesses, or chassis are in place, clean, and ready to receive glass block. Clean all sides of glass block to permit a good mechanical bond. Consult glass block manufacturer’s literature for placement of anchors, reinforcing, and expansion strips. All panels and sills covered with asphalt emulsion must be cured a minimum of…
    • Read more
  • SGM GROUT STAINSGM GROUT STAIN Quick View
    • SGM GROUT STAINSGM GROUT STAIN Quick View
    • ,

    • SGM GROUT STAIN

    • CHARACTERISTICS Excellent Workability Easy Clean Up High Bond Strength PREPARATION Surfaces should be in good condition, free from all alkali, moisture, sealers, waxes, dirt or any other foreign materials that would interfere with a good bond. For best results, clean surface with SGM Safe Clean Crystals, followed by a wet scrubbing and flooding with water. Thoroughly, dry surface before application of Color…
    • Read more
  • SGM Mortar Mix Surface Preparation Quick View
    • SGM Mortar Mix Surface Preparation Quick View
    • ,

    • SGM Mortar Mix Surface Preparation

    • INSTALLATION SURFACE PREPARATION Concrete and Plaster Surfaces: All masonry should be twenty-eight (28) days cured and shall be structurally sound, clean, and free of any moisture, wax, oil, paint particles, curing agents, or foreign matter. Remove any liquid curing agents or concrete sealers, followed by a clear water wash. MIXING Using a clean mortar box or mechanical mixer, add sufficient cool…
    • Read more
  • SGM Multi-Lite Polymer Modified Light-Weight Mortar Quick View
  • SGM POOLS Glass Mosaic Tile (GMT) Thin-Set Mortar Quick View
    • SGM POOLS Glass Mosaic Tile (GMT) Thin-Set Mortar Quick View
    • ,

    • SGM POOLS Glass Mosaic Tile (GMT) Thin-Set Mortar

    • INSTALLATION SURFACE PREPARATION Concrete and Plaster surfaces: All areas should be twenty-eight (28) days cured and shall be structurally sound, clean, and free of any moisture, wax, oil, paint particles, curing agents, or foreign matter. The slab should have a steel trowel or broom swept finish. Remove any liquid curing agents or concrete sealers, followed by a clear water wash. Surfaces…
    • Read more